Overview: Shanghai Huasan Powder Equipment Co., Ltd.
The gravity-free twin-shaft paddle mixer has strong and efficient characteristics. The mixing time is short. The designed mixing time is 1-3 minutes. The uniformity of 1: 1000 is greater than 95%. The two stirring shafts in the horizontal cylinder rotate at the same speed in opposite directions, and the blades arranged at a special angle on the shaft ensure that the materials are thrown in three directions: radial, annular, and axial. mixing.
1. Mixing effect: Even if the materials have differences in specific gravity and particle size, they can achieve a good mixing effect under the rapid and vigorous tossing and stirring of the staggered stirring blades.
保持1400rpm以上的高转速，在物料失重区将聚料粉碎、解聚。 2. Crushing device: When the material has a clump, it is necessary to add a crushing device. The "crushing rod" with a triangular tooth cover maintains a high speed above 1400 rpm, and crushes and disaggregates the polymer in the weightless area of the material.
3. Discharge form: The discharge form is generally a pneumatic (manual) flap valve. The arc valve is tightly embedded in the cylinder and is flush with the inner wall of the cylinder. There is no accumulation of materials and mixed dead angles. The standard type has a large door and a small door. , The large door opens to the side of the tube, the discharge is clean and fast, and the residue is small.
4. Two-piece blade: In order to reduce the replacement cost of the consumable parts of the equipment, the paddle blade can be made into two pieces, and a movable small blade can be placed on the blade base to directly replace the worn small sheet. Economical and fast.
5.Gap between the blade and the cylinder: The gap between the blade and the cylinder wall directly affects the mixing effect and the residual material after the material is discharged; the gap between the blade and the cylinder of our product is controlled at 3-5mm.
6.20 cubic meters of full volume: This series of mixers can achieve a maximum volume of 20 cubic meters, which is very different from ordinary specifications for the transmission form and mixing base of large specifications equipment.
[Note: Chinese parameters prevail]