Precautions for operation and cleaning of stainless steel grinder
1. Before using the stainless steel shredder, check whether all the fasteners of the machine are tightened and the belt is tensioned.
2. The running direction of the spindle must conform to the direction of the arrow shown on the protective cover, otherwise the machine will be damaged and personal injury may be caused.
3. Check whether the stainless steel shredder is complete.
4. Check the stainless steel shredder for hard debris such as metal in the crushing room, otherwise it will break the cutter and affect the operation of the machine.
5. The purity of the material must be checked before crushing, and no hard metal is allowed to enter, so as not to damage the tool or cause accidents such as burning.
6. The oil cup on the machine should always be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before stopping. If you don't continue to use, you should remove the remnants in the machine.
8. Regularly check whether the cutter and the screen are damaged. If it is damaged, it should be replaced immediately.
9. When using the machine body, there will be slight vibration. Be sure to tighten the cover handle to prevent accidents.
Stainless steel shredder cleaning matters:
1. Cleaning of other parts of the shredder: mainly cleaning the shredder cover and the parts with screws on the outside. These places can be cleaned with a light brush, if necessary, clean with water or detergent.
2. Cleaning of the crusher cabin. The crusher cabin is what we call the crushing bin. The crushing of the items is carried out in the crushing bin, so it is the part to focus on cleaning. The main fixed part of the crusher bin and the motor is the cutter head part inside the cabin. The top of the cutter head is fixed by a stainless steel screw. As long as the screw is loosened with a wrench and the blade is removed, the cabin and the motor can be separated. When disconnecting, pay attention to unplug the link line. The cleaning tools of the grinder compartment involve special wrenches, brushes, etc. Like Jiupin grinders are equipped with special wrenches, which is convenient for removing the cutter head.